Safety Belt

Description

Product Details
1. Function: The belt/harness used in construction industry
2. Material: Polyester, polypropylene
3. 3 \”D\” rings attachment point with 5 adjustable points.
4. Webbing width: 45mm or 55mm
5. Harness belt webbing length: 150cm/180cm/200cm
6. Belt webbing length: 110cm. Diameter: 11cm
7. Body harness has PE Environmental protection Back Cushion and Waist Cushion.
8. The hook is divided into small, middle and large. Small and middle hook is made by stamping. The large one is made by forging.

How to use safety belt:
1. When you fasten the belt, set the buckle correctly and \”D\” rings position on rear side of waist.
2. The hook led to safety belt should be hung as high as possible.
3. The life rope should not be tied any of sharp angled object.
4. Do not use the life rope to support yourself (For example, you binf it a pole to make \”U\” tension at your working on electric pole, etc.)
5. Do not use the safety belt which had once been damaged with impact, even if no difference in its out looking is recognised.
6. Any of safety belts, having the following defects should not be used.
a) Insufficient operation of safety cover of the hook.
b) Insufficient operation of the buckle\’s lock.
c) Worn out life rope.
d) Kinked life rope.
e) Worn out threads on the stitched part of the belt.
f) Deformed if racked harness.

Keeping:
1. Keep the safety belt exposed to the fresh air in the shade.
2.  Keep the safety belt on a pole, not on the ground directly.
3. BE careful the life line not to kink.
4. Do not keep the safety belt in a room with chemicals (acid, alkaline substances, organic solvents etc).

Tensile Strength of Safety Belt: